Bausataz Bogenleuchte 6624

  • Good morning, dear Sirs,


    I have a lot of troubles making working this item. I don't know the way to plug in the bulb and how I have to connect the brown wire. Can you send me a simple diagram?
    Thanks in advance


    Best reagards
    Stefano Rocca

    • Offizieller Beitrag

    Dear Sir,


    during assembly of the incandescent lamps is to be noted that the bare wire of the incandescent lamp is inserted along with the black insulated wire into the tube. The brown ground wire (with resistor) should be stripped to a length of 20 mm. Then he is pushed as far as the stripped end of the bottom of the mast. Both cables at the lower end of the mast should be twisted so that they do not slip out. Both cables are then connected to the transformer (14-16 V AC/DC) via plus and minus. For a better threading helps baby powder. With this powder you must rubb the cable.

    Mit freundlichen Grüßen
    Wolfgang Brinken
    Viessmann Modelltechnik GmbH