Viessmann 5214 and 5208

  • In addition to our club train -layout in n-scale,we are having a tram pendel system using your 5214, but since the layout is fairly large, we wanted to add a couple of stops in addition. We have therefore bought 5208 as well. Do these go together?, and how will they be wired? The trams use DC.
    We were also talking about using 2 or 3 trams with double lines at each end, when one tram comes in to the end station, the next one leaves for the other end and so on.Will that be possible with 5214 AND 5208. Only one tram will be moving at any one time.

    -------\0000000000000000000000/-------
    00000 ---------!--------!------------ 00000
    -------/0000000000000000000000\-------

    Best regards
    Björn
    Norway

    • Offizieller Beitrag

    Hello,


    the timer switch 5208 can be integrated with the shuttle train control 5214. This requires that the sockets 10 + 11 on 5214 are be connected with the sockets 10 + 11 on the 5208 accordingly. This works even when several 5208 are to be integrated into a shuttle route.

    Mit freundlichen Grüßen
    Wolfgang Brinken
    Viessmann Modelltechnik GmbH

  • Zitat von WBrinken

    Hello,


    the timer switch 5208 can be integrated with the shuttle train control 5214. This requires that the sockets 10 + 11 on 5214 are be connected with the sockets 10 + 11 on the 5208 accordingly. This works even when several 5208 are to be integrated into a shuttle route.




    Thank you, it sounds easy


    Björn