driethenauer hat geschrieben:
Hallo vadimev,
I think it is the same answere as you have got in the ESU-forum.
You can get different adapters by tams.
Than you can take the new norm of s88-N.
I think there are no problems with commander, s88 is normed,
therefor it is not possible to change fixed levels.
==========(EN)=============
Thanks for Answer,
But i think, that having these adjustments as has Maerklin 60214/215 , You can additionaly sufficiently speed up S88 bus velocity.
I have 512 contacts at my layout wired by shielded FTP cable , and refresh rate is about 2 times per second. It's too slow and equal 0.5Kps.
This Maerklin S88 settings and their new firmware seems too convenient for speed up these speed up to 2 times without errors.
==========(DE)=============
Vielen Dank für Antwort,
Aber ich denke, dass mit diesen Anpassungen hat Märklin 60214/215, man kann zusätzlich ausreichend beschleunigen S88 Bus Geschwindigkeit.
Ich haben 512 Kontakte auf meinem Layout abgeschirmt FTP-Kabel verdrahtet, und Bildwiederholfrequenz beträgt ca. 2 mal pro Sekunde. Es ist zu langsam und gleich 0.5Kps.
Das Märklin-S88-Einstellungen anв ihre neue Firmware scheint zu bequem für die Beschleunigung dieser Geschwindigkeit bis zu 2 mal ohne Fehler.
=========================
Vadim